General information

ABS (acrylonitrile butadiene styrene) is an impact-resistant technical thermoplastic resin obtained from petroleum products.

One of the most popular plastics for 3D printing. ABS plastic is more flexible than PLA and can be processed well. The printed product can be sanded, coated with primer, and later with acrylic paint. The acetone treatment smooths out the irregularities ("steps") typical for 3D printing.

Due to its high strength, ABS plastic is suitable for printing structural elements, cases, and mechanism elements. When printing with ABS, good ventilation will be required in the room as the plastic has an odor. If you need odorless plastic, use PLA or PETG.

Benefits of ABS Bestfilament:
- Wide color palette.
- Easy to sand and paint.
- Possible post-processing with acetone to smooth the "steps" of the layers.
- Parts can be bonded together with superglue.
- Deviation of the diameter of the bar within one coil is not more than 0,02 mm.

Specifications:
- Hardness: 5/10
- Durability: 8/10
- Density: 1040 kg / m3
- Softening point - 98 ° C
- Hardness (according to Rockwell) - R109
- Nominal elongation at break - 12%
- Flexural strength - 65 MPa
- Flexural modulus - 2,1 GPa
- Operating temperature - 80 ° C
- Printing accuracy - ± 1%
- Moisture absorption - 0,24%

Recommended print parameters for ABS Bestfilament:
- Extruder temperature: 230-260 ° С
- Table temperature: 90-110 ° С
- Print speed: 40-60 mm / s
- Model blowing: No (May be required for small parts)
- Retract: Yes
- Printer case: Closed
- Shrinkage when printing: 0.4%
- Solvents: Dichloroethane, dichloromethane, acetone, ethyl acetate

Характеристики товара

The weight	1 kg
Dimensions	20 × 20 × 8 cm
Country of origin	Russia
Manufacturer	Bestfilament

There are no more offers for this item!

General questions

There are no requests yet.